What is the use method of the sled

The use of the wool trolley generally includes the following steps:

1. Check the equipment: Before using the skid truck, check the equipment to ensure that the components are running normally and the tools are intact.

2. Enter the working area: Drive the sled into the roadway or working face that needs the sled to ensure that the sled is parked stably.

3. Location of unstable rocks: Determine the location of unstable rocks that need to be pried out by observation or other detection means.

4. Insert the hair prying tool: Insert the hair prying tool (such as a crowbar, steel bit, etc.) into the crack or loose part of the unstable rock.

5. Apply force: Through the mechanical or hydraulic system, apply the appropriate force to pry the unstable rock away from the position.

6. Clean up the pried rocks: clean up the pried rocks in time to ensure that the working area is smooth.

7. Move the trolley: move the priing trolley to the next working position as needed.

8. Repeat operation: Repeat the above steps until the entire priing operation is completed.

It should be noted that when using the sled sled, the operator needs to undergo professional training and be familiar with the operating procedures and safety precautions of the equipment. In addition, it is necessary to rationally select the type and tools of the sled according to the specific geological conditions and operational requirements of the mine, and operate in strict accordance with the operating procedures to ensure the safety and efficiency of the operation.

At the same time, in order to ensure the safety of workers, in the process of prying hair, should also be equipped with appropriate personal protective equipment, such as safety hats, protective glasses, ear plugs and so on. In addition, regular maintenance and maintenance of the sled is also an important measure to ensure the safe and reliable operation of the equipment. If you have other questions about the use of the skid truck, it is recommended to consult professional mine technicians or relevant manufacturers.