How to deal with engine flameout of electric scraper

Shandong scraper manufacturers explain how to deal with electric scraper engine flameout

With the continuous development of science and technology, in order to reduce the expenditure of human, material and financial resources and reduce the secondary waste of resources, the electric scraper has the characteristics of stable loading, large control range, no sprinkling, high efficiency, continuity and so on, and is widely used. The electric scraper is suitable for mines, railway tunnels, hydraulic culverts and other departments. Here's how to deal with the engine flameout of the electric scraper:

1. If the "AC charging indicator" or "engine oil pressure" signal is on when operating the scraper, the engine should be shut down immediately; If the "cylinder head temperature" signal is on, stop the scraper and let the engine gradually cool down, allow the engine to idle for a few minutes, and then stop.

2. Disconnect the main power switch. If the outdoor temperature is lower than -300C, remove the battery and move it indoors to avoid freezing and cracking. 3, when there is no emergency, the engine is not allowed to stop suddenly from full load, should first let the engine cool down, and then stop the electric scraper; 4, press the "flame off button", press the "stop button". The above is the relevant knowledge of Shandong scraper, welcome to pay more attention to our website!